What Actually Goes Into a Proper Boardroom AV Build
Boardrooms Are Not Just Bigger Huddle Rooms
A lot of businesses treat boardroom AV as small-room gear with a bigger price tag attached. The logic seems reasonable on the surface, but it misses what actually changes once a room moves from six seats to fifteen or twenty.
A boardroom is not a larger version of the same problem a huddle room solves. It is a genuinely different set of decisions, made in a specific order, where each choice constrains the next one.
Skip a step in that sequence and the budget does not disappear, it just moves further down the project where it costs more to fix. A camera chosen without thinking about table length leads to a microphone array that has to compensate for blind spots that should never have existed.
A good first stop before any boardroom quote is finalised is Kickstart Computers Australia so the AV budget gets scoped correctly first.
Step One: Getting the Camera Coverage Right
The sequence genuinely starts with the camera, because the field of view it covers determines where people can sensibly sit and still be seen clearly. A PTZ camera that can pan and zoom toward whoever is speaking becomes worth the extra cost once a room passes roughly twelve people.
Twelve to twenty people can usually be covered by one properly positioned PTZ unit. Past that range, particularly with long or oddly shaped tables, a second camera angle starts to make sense rather than relying on zoom alone to compensate.
Both AVer and Logitech offer boardroom PTZ cameras, and the decision between them is usually less about raw image quality, which is fairly close between the two, and more about existing wiring infrastructure or brand consistency with other rooms already fitted out.
It is worth testing low-light performance specifically, since boardroom lighting is rarely as controlled as a showroom demo suggests. A camera that looks sharp in marketing material can behave quite differently once afternoon light through a window becomes the dominant light source in the room.
Step Two and Three: Ceiling Microphone Arrays and Room Control
The microphone layout is a direct consequence of where the camera placed the seating. Table microphones lose effectiveness as table length increases, and ceiling-mounted arrays become the more reliable option once a room stretches beyond what a single table mic can cover evenly.
Get the camera wrong and the microphone budget doubles to compensate. Every boardroom mistake is really two mistakes.
Room control is the final piece, and it only makes sense once camera and microphone decisions are already settled. The value is mostly in removing friction - a single control panel that starts the right meeting platform without anyone needing to plug in a laptop or hunt for a remote.
Teams Rooms certification matters more at this scale than in a small huddle room, since boardroom-grade hardware is more expensive and a certification mismatch is a costlier mistake to discover after installation. Confirming certification before the build avoids paying twice for the same room.
It helps to break the budget into the same three steps rather than asking for one all-up number. Camera, audio and room control each sit in a different price bracket, and separating them makes it much clearer where the bulk of the spend is actually going.
This sequence-based approach also applies directly to collaboration spaces that function as informal boardrooms - open-plan areas with a screen and camera set up for ad hoc larger meetings. The same logic of camera first, then audio, then control still holds, even when the room was not purpose-built as a boardroom.
The businesses that get this right are not necessarily the ones with the biggest budget. They are the ones that resisted the urge to buy everything at once and instead let the camera decision genuinely inform the audio decision before any money was spent on either.
Common Questions on Boardroom Video Conferencing
Is one PTZ camera enough for a large room?
One PTZ camera is usually enough for rooms up to roughly twenty people with a standard table layout. Beyond that, or with unusually long or irregularly shaped tables, a second camera angle is often needed to avoid blind spots.
Is a ceiling mic array necessary for boardrooms?
For longer boardroom tables, ceiling-mounted arrays generally outperform table microphones, since they cover the whole room evenly rather than picking up sound strongest near a single fixed point.
Can a boardroom function without room control?
Room control is a single-touch panel for starting calls without manual setup each time. A boardroom can function without one, but meetings tend to start later and with more friction as a result.
What happens if boardroom hardware is not certified?
It is not a hard requirement, though the financial risk of getting it wrong is much higher at boardroom scale. Checking certification before the build is a small step compared to the cost of fixing it afterwards.